ACE 100 Energiser Hammer 1 – Zone

KSh24,000.00

Features:

  • Fully programmable with keypad (not included)
  • High voltage live line monitoring with alarm.
  • Earth line monitoring with alarm.
  • Gate (Auxiliary) monitoring with alarm.
  • Siren and Strobe connections
  • On board armed response connection and relay
  • Battery backup
  • Solar enabled
  • Lightning and power surge suppression build in.
  • Easy to use optional LED or LCD keypad
  • Variable output Joule settings

ACE 200 Energiser Hammer 1- Zone

KSh30,000.00

• 8 Joule Energizer
• High voltage live line monitoring with alarm
• Gate (Auxiliary) monitoring with alarm
• Siren and Strobe connections
• One board armed response connection and relay
• Fully programmable with keypad
• Remote control option• Battery backup, Lightning and power surge suppression build in
• Easy to use optional LED or LDC keypad
• Variable output Joule settings

BM1 I JVA Monitor

KSh11,400.00

The BM1 (PTE0211) is a basic electric fence monitor. It provides an alarm when your electric fence is cut or shorted, or the energiser has been turned off.

When connected to the end of the fence (return wire) the BM1 can monitor one complete circuit (zone) of electric fence.

This monitor can be powered from a 12V power supply, or a 12V battery. If you need the monitor to operate during a power failure, consider using a 12V lead acid battery that is being kept charged from a battery charger or solar panel.

The BM1 is intended to be used with pulsed type electric fence energisers with output voltages of 10kV or less. The energiser should conform to IEC60335.2.76 or similar.

The BM1 includes two switched 12V outputs:

  • Siren
  • Strobe

It also has an internal Beeper, which can be muted with a shunt

CPS 6000 Energiser Hammer 1 – Zone

KSh24,000.00

CPS 6000 electric fence energiser
– Fully programmable with included keypad
– High voltage live line monitoring with alarm.
– Earth line monitoring with alarm via Smartlink
– Gate (Auxiliary) monitoring with alarm.
– Siren and Strobe connections
– Battery backup
– Solar enabled
– Lightning and power surge suppression build in.
– Comes with easy to use LCD keypad
– Multiple keypads can be added
– Optional extra alarm outputs per zone

CPS 6004 Energiser Hammer : 4 Zones

KSh80,000.00

CPS 6004: 4 ZONES electric fence energiser
– Fully programmable with included keypad
– High voltage live line monitoring with alarm.
– Earth line monitoring with alarm via Smartlink
– Gate (Auxiliary) monitoring with alarm.
– Siren and Strobe connections
– Battery backup
– Solar enabled
– Lightning and power surge suppression build in.
– Comes with easy to use LCD keypad
– Multiple keypads can be added
– Optional extra alarm outputs per zone
– Lightning and power surge suppression build in.
– Comes with easy to use LCD keypad
– Multiple keypads can be added
– Optional extra alarm outputs per zone

Druid 114 Energiser

KSh37,000.00
The Druid 114 LCD single zone energizer is the ideal choice for long distance parallel electric fencing systems which require monitoring such as large African animal game farms, parks and nature reserves .This energizer is ideal for large game and wild animals, such as elephants, lions, tigers, rhino, buffalo, bears, warthog, hippo, buck and deer.

Using the Adaptive Power Technology (APT), pioneered and patented by Nemtek, this energizer offers a new and unique method in detecting how much power a fence can accept and handle before it starts to arc and waste energy, thus maximising the power on the fence.

Features

  • LCD display shows information which is quick and easy to read
  • Powers up to 130km of fence
  • Powered by 220V mains and includes built-in battery back-up
  • 140W solar panels and external 12V 15A solar regulator with a large 100Ah  cattery can be added when mains power is not available
  • Built-in alarm that sounds when the fence is tampered with
  • Best choice for long fences that require monitoring
  • Easy to use tag switch for controlling the unit if the keypad option is not used
  • Lightning and power surge suppression built in to reduce the possibility of damage due to power surges
  • Intelligent power saving to extend the battery life and save energy
  • Adaptable mounting options (wall or cabinet)
  • The energizer can be controlled remotely by linking it up to two keypads

Druid 13 Nemtek Energiser

KSh19,000.00

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms.

Features
• 3 Joule output energy (single zone)
• Robust and flexible design for home security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Walk test mode for easy fence testing
• The LCD background colour changes to easily identify the fence condition
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
• Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads

Druid 15 Nemtek Energiser

KSh21,000.00

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT), these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximizes the power on the fence and minimizes false alarms.

Features
• 4.6 Joule output energy (single zone)
• Robust and flexible design for home and commercial security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Walk test mode for easy fence testing
• The LCD background colour changes to easily identify the fence condition
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
• Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads

Druid 18 Nemtek Energiser

KSh27,000.00

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms.

Features

• 7.6 Joule output energy
• Ideal choice for long distance series electric fencing systems that require monitoring
• Robust and flexible design for home, commercial security, industrial and game security and control.
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Walk test mode for easy fence testing
• The LCD background colour changes to easily identify the fence condition
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
• Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads

Druid 25 – 2 Zone Energiser

KSh35,000.00
  • Two 2.4 Joule independently monitored and controlled zones
  • The robust and flexible design is ideal for commercial, industrial and high-security sites
  • Each zone can be set independently to be on/off or in high/low voltage modes
  • Can be programmed into alarm sensor mode allowing it to be integrated into a separate burglar alarm system
  • Four zones can easily be created by linking two Druid 25LCD energizers together using the Druid four-zone keypad
  • Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
  • Connectable to armed response radio or GSM module
  • Lightning and power surge protection
  • Intelligent power saving to extend battery life
  • Built-in gate alarm input to monitor if the gate is open or closed
  • Optional keypad for controlling and programming the energizer
  • Up to two keypads
  • The relay expansion card can be used to increase the number of information outputs from the energizer
  • Walk test mode for easy fence testing
  • The LCD background colour changes to easily identify the fence condition

Druid 28 – 2 Zone Energiser

KSh37,000.00

Features:
• Two 3.7 Joule independently monitored and controlled zones
• The robust and flexible design is ideal for commercial, industrial and high-security sites
• Each zone can be set independently to be on/off or in high/low voltage modes
• Can be programmed into alarm sensor mode allowing it to be integrated into a separate burglar alarm system
• Four zones can easily be created by linking two Druid 25LCD energizers together using the Druid four-zone keypad
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Built-in gate alarm input to monitor if the gate is open or closed
• Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads
• The relay expansion card can be used to increase the number of information outputs from the energizer
• Walk test mode for easy fence testing
• The LCD background colour changes to easily identify the fence condition

EZ 630 Energiser Hammer 1 – Zone

KSh11,000.00

KEY FEATURES:

1. 4 joule energizer
2. High Voltage live line monitoring with alarm
3. Gate (Auxiliary) monitoring with alarm
4. Siren And Strobe Output Connections
5. Connectable to an armed response radio
6. Easy to use on/off reset key
7. Remote control option
8. Battery Backup
9. Monitors the fence return voltage (single zone)
10. Remote control option
11. Alarms on low voltage threshold
12. Powers up to 2Km of fence wire (1mm)
13. 4 Joule and 10KV maximum output
14. Powers up to 2Km of fence wire (1mm)

EZ 640 Energiser Hammer 1 – Zone

KSh15,000.00

The Hammer Energizer EZ 640 energizer is the heart of the system & should be purchased according to the length of the fence you require. All energizers are governed to a maximum of 10kv. The Electric energizer powers the fence up to 3KM. Monitors the fence return voltage (single zone). Powers up to 3Km of fence wire (1.6mm). 5 Joule and 10KV maximum output, and a battery backup in case mains failure. Alarms on low Voltage threshold. Auxiliary alarm input (gate monitor). Siren and strobe output Remote control option.

EZ 680 Energiser Hammer 1 – Zone

KSh35,000.00

Hammer 680 energizer offers single-zone perimeter fencing with up to 8joules of stored power. It can monitor 4km of electric fence installed with 1.6mm HT wire.

  • Monitors the fence return voltage (single zone)
  • Alarms on low Voltage threshold
  • Auxiliary alarm input (gate monitor)
  • Siren and strobe output
  • Remote control option
  • Powers up to 4Km of fence wire (1.6mm)
  • 8 Joule and 10KV maximum output
  • Battery backup

JVA Z28 2 Zone Security Energizer 8 Joule with LCD Display

KSh50,000.00

The JVA Z28 is a two zone security electric fence Energizer purpose designed for the control and monitoring of perimeter security electric fences. It can meet all of the requirements from basic residential to fully integrated high profile installations.

The Z28 can be programmed and controlled using the optional LCD keypad or Touch keypad. It can also be networked with other Z Range Energizers to form a pulse synchronized group for larger sites which require more than two zones.

Features

  • High‐Voltage, Double‐Zone Fence Monitor triggers alarm when live wires are tampered with
  • Earth Wire Monitor triggers alarm when the earth wires are tampered with
  • LCD Voltage Out and Return Display
  • Gate Monitor input to monitor the gate
  • Dynamic Voltage Monitoring minimizing arcing and false alarms while maximizing power and battery life
  • 8 Joules maximum output energy
  • Compliant with IEC60335‐2‐76
  • Built‐in Lightning and Surge Protection
  • Up to 24‐Hour Monitoring in the event of a power failure
  • High and low power options
  • Energizer supplied with secure Key Switch Operation
  • Diagnostic Mode
  • 2 Standard Fully Programmable Relays plus option for 3 more on request
  • Keypad Compatible – Use a Z‐Range Keypad
  • Programmable to Bi-polar or Standard
  • Pulse Synchronization in group mode
  • Anti-tamper option programmable on request
  • Internal Battery Backup in case of power failure

Keypad JVA

KSh8,000.00

The keypad is used to control individual fence Energizers, Monitors or the entire site. The Customer has access to all of these features via a Menu Driven system or by entering key sequences. Security Installers also use the keypad to configure the JVA Security devices to the customer’s needs.

Features:

  • Control, monitor and program any Z-Series device
  • Displays Armed / Disarmed status and any trouble or alarm
  • Device screen displays fence voltages and conditions
  • Visual and Audible indication of alarm and trouble events
  • Menu driven interface
  • 4-line Backlit LCD Display
  • Quick Arm/Disarm keys
  • 500 entry Event Log with accurate Date and Time information
  • 1 – 14 energizers can be controlled from one Keypad;
  • 1 – 3 keypads can control one energizer

LCD Keypad I Hammer

KSh10,000.00

Incorporating an intuitive menu-driven interface, 16 x 2 character LCD keypads with proximity key option, 4 one-touch buttons for easy group arm/disarm or macro operations.

LED Keypad Hammer

KSh7,000.00

• Operates on 630, 640 and 680 energizers
• 3 Level pin code operation
• Provides remote operation of energizer (on, off and reset)
• Power and on/off indication bar graph for fence condition indication
• Visual and audible warning of alarm condition
• Allows multiple user control of the energizer

Merlin 4 with Keypad Energiser

KSh24,000.00

The Merlin 4 includes a keypad for controlling and programming the energizer. The energizer can be installed near the fence and the keypad can be located where it is most convenient for the user. This allows the user to control the energizer remotely, with up to four keypads (EE-MKP).

Features
• 3.7 Joule output energy (single zone)
• Robust and flexible design for home and commercial security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Powered by 230V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
• Gate chime available to alert that the gate has been opened or closed
• The fence voltage outputs can be adjusted using the keypad
• The siren and gate outputs can be bypassed using the keypad

Remote Key Switch Hammer

KSh4,500.00

Remote Key switch is designed for easy installation, as well as being robust and resistant. It is extremely versatile and can be used on a number of energizers to add ease of use and extra functions to a new or existing system.

Features:

  • Provides remote operation (on/off/reset) of the energizer
  • Indicates if the power supply to the energizer is functioning
  • Indicates whether the energizer is on or off
  • Indicates if the energizer is pulsing and if the return voltage is sufficient
  • Provides visual and audible warning of an alarm condition
  • Allows multiple user control of the energizer